72″x21″ Unfinished Maple Bathroom Vanity

Avalon square doors are manufactured using 3/4″ thick by 2″ wide solid hardwood assembled at all four corners using mortis and tenon joints, adhesive and coated fasteners. Door rails and […]

List Price: $492.99
Price: $389.99
You Save: $103 (21%)
Temporarily out of stock

Sorry, this product is temporarily out of stock.

Check back soon. We get new shipments in daily!

Atlanta, GA

near near Spaghetti Junction

Unavailable

Sorry, this product isn't currently available.

Get Directions

Or make a design appointment

Kennesaw, GA

near Kennesaw State University

Unavailable

Sorry, this product isn't currently available.

Get Directions

Or make a design appointment


Stay up-to-date on price decreases, sales and new inventory!

Don't worry. We never share or sell your information. Period.


Product Description

Avalon square doors are manufactured using 3/4″ thick by 2″ wide solid hardwood assembled at all four corners using mortis and tenon joints, adhesive and coated fasteners. Door rails and stiles are machined to receive a 1/4″ hardwood veneer panel. Cathedral doors feature the same material and construction as the square door except the top rail is 3-3/4″ wide and is machined to create a cathedral shape. Door edges are reverse beveled and contoured to provide easy cabinet access. Drawer fronts are manufactured using 3/4″ thick solid hardwood and have an outside edge profile to match the doors. BASE CABINET CONSTRUCTION Face Frames 3/4″ thick kiln dried ash, oak, maple, or similar hardwood depending on cabinet style, precisely fitted, glued and fastened at all joints. Bottoms 3/8″ thick furniture board finished to match other interior components in either maple wood grain or white depending on cabinet style. Bottom is dadoed into sides and face frame. Sides 3/8″ thick furniture board finished to match other interior components in either maple wood grain or white depending on style. Exterior side surfaces are finished in a complementing wood grain or white depending on cabinet style and stain color. Sides are dadoed into bottom and face frame. Backs 1/8″ thick hardboard in either maple wood grain or white depending on cabinet style. Back is recessed and dadoed into sides. Shelves 1/2″ thick medium density fiberboard in either maple wood grain or white depending on cabinet style. Shelf is half depth and is dovetailed into sides. Toe Kick 5/8″ particleboard. Toe kick is mounted internally and extends from the bottom of the base floor to the bottom of the cabinet for full support. DRAWER BOX CONSTRUCTION-75# CAPACITY Drawer Box Sides 1/2″ thick medium density fiberboard dovetailed and glued into a four-sided box. Sides are dadoed to accept drawer bottom. All sides are finished in maple wood grain or white depending on style. Drawer Bottoms 1/8″ thick hardboard in maple wood grain or white depending on style. Drawer bottoms are dadoed into sides and hot melt glued. All cabinetry carries the Kitchen Cabinet Manufacturers Association (KCMA) certified cabinet seal, and complies with American National Standards Institute (ANSI) specification number A161.1-1995.


Don't miss out on sales!

100% secure. We never share or sell your information.